Display Ospf Asbr-Summary - 3Com 8807 Command Reference Manual

Table 54 Description of the fields of the display ospf abr-asbr command
Field
Nexthop
Interface
display ospf Syntax
asbr-summary
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
ip-address: Matched IP address in dotted decimal format.
mask: IP address mask in dotted decimal format.
Description
Use the display ospf asbr-summary command to view the summary information
of OSPF imported route.
If the parameters are not set, the summary information of all OSPF imported
routes will be displayed.
Related command: asbr-summary.
Example
# Display the summary information of all OSPF imported routes.
<SW8800> display ospf asbr-summary
OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count:
net
mask
tag
status
The Count of Route is 0
net
mask
tag
status
The Count of Route is 0
Table 55 Description of the fields of the display ospf asbr-summary command
Field
net
Description
Nexthop address
The local output interface
Summary Address
: 168.10.0.0
: 255.254.0.0
: 1
: Advertise
Summary Address
: 1.1.0.0
: 255.255.0.0
: 100
: DoNotAdvertise
Destination network segment
OSPF Configuration Commands
2
Description
423