Display Ospf Abr-Asbr - 3Com 8807 Command Reference Manual

422 C 25: OSPF C
HAPTER

display ospf abr-asbr

C
ONFIGURATION OMMANDS
View
Any view
Description
Use the display debugging ospf command to view the debugging states of
global OSPF and all processes.
Related command: debugging ospf.
Example
# Display the debugging states of global OSPF and all processes.
<SW8800> display debugging ospf
OSPF global debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
OSPF process 100 debugging state:
OSPF SPF debugging is on
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf abr-asbr command to view the information about the ABR
and ASBR of OSPF.
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
<SW8800> display ospf abr-asbr
OSPF Process 1 with Router ID 10.110.98.138
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination
IA 2.2.2.2
Table 54 Description of the fields of the display ospf abr-asbr command
Field
Destination
Area
Cost
Area Cost
0.0.0.0 10
Description
Router ID of the ABR or ASBR
Area where the router is connected with ASBR
The routing overhead value of the route
Nexthop Interface
10.153.17.89 Vlan-interface1