info-center logfile enable
Syntax
info-center logfile enable
undo info-center logfile enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the info-center logfile enable command to enable the output of system information to the log file.
Use the undo info-center logfile enable command to disable the output of system information to the
log file.
By default, the output of system information to the log file is enabled.
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
View
System view
Default Level
2: System level
Parameters
freq-sec: Frequency with which the system saves the log file, which ranges from 1 to 86,400 seconds.
The default value is 86,400.
Description
Use the info-center logfile frequency command to configure the frequency with which the system
saves the log file.
1-14