Info-Center Logfile Enable; Info-Center Logfile Frequency - H3C SR6600 Command Reference Manual

Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
buffersize: Specifies the maximum number of log messages that can be stored in the log buffer. The value
range is 0 to 1024, and the default is 512.
Usage guidelines
The info-center logbuffer command takes effect only after the information center has been enabled with
the info-center enable command.
Examples
# Output system information to the log buffer through channel 4, and set the log buffer size to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50

info-center logfile enable

Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable
Default
The log file feature is enabled.
Views
System view
Default command level
2: System level
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable

info-center logfile frequency

Use info-center logfile frequency to configure the interval for saving system information to the log file.
Use undo info-center logfile frequency to restore the default interval.
215