Info-Center Console Channel; Info-Center Enable - H3C SR6600 Command Reference Manual

info-center console channel

Use info-center console channel to specify the console output channel. The system uses this channel to
output information to the console.
Use undo info-center console channel to restore the default console output channel.
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
Default
The console output channel is channel 0.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
Usage guidelines
The info-center console channel command takes effect only when the information center has been
enabled with the info-center enable command.
Examples
# Specify the console output channel as channel 0.
<Sysname> system-view
[Sysname] info-center console channel 0

info-center enable

Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Default command level
2: System level
213