Displaying Transceiver Module Information And Alarming Information - H3C SR6604 Installation Manual

Step
2. Enter view of the SFP port
or RJ-45 port of the combo
interface.
3. Activate the RJ-45 Ethernet
port or SFP port.
Displaying transceiver module information and alarming
information
Table7-8 Commonly used transceiver modules
Transceiver module
type
SFP (Small Form-factor
Pluggable)
XFP(10-Gigabit small
Form-factor Pluggable)
SFP+
QSFP+
Displaying transceiver module information
To identify transceiver modules, you can use the following command to view the key parameters of
the transceiver modules, including transceiver module type, connector type, central wavelength of
the laser sent, transmission distance, and vendor name or name of the vendor who customizes the
transceiver modules.
To display transceiver module information:
Purpose
Display key parameters of the transceiver
module in a specified interface
Displaying the alarming information or fault detection parameters for a transceiver module
The system outputs alarm information for you to locate and troubleshoot faults of transceiver
modules. For the H3C-customized transceiver modules, the system can also monitor the key
parameters, such as temperature, voltage, laser bias current, TX power, and RX power. When these
parameters are abnormal, you can take corresponding measures to prevent transceiver module
faults.
To display the alarming information or fault detection parameters of a transceiver module:
Purpose
Display the current alarm
information of the transceiver
Command
interface
interface-type
interface-number
combo enable { copper
| fiber }
Application scenarios
Typically used for 100M/1000M
Ethernet ports or POS
155M/622M/2.5G ports
Typically used for 10G ports
Typically used for 10G ports
Typically used for 40G ports
Command
display transceiver
interface
[ interface-type
interface-number ]
Command
display transceiver
77
Remarks
N/A
Required.
By default, the Ethernet port is active.
Whether
Whether can be
can be an
an electrical
optical
transceiver
transceiver
Yes Yes
Yes No
Yes No
Yes No
Remarks
Available for all
transceiver modules.
Remarks
Available for all transceiver
modules.