Viewing device startup information
After the device is powered on, the configuration terminal output startup information. The output
information varies by software versions.
The following shows a sample output you will see when the device starts up:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing..........Done.
...
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt
After the device finishes startup, verify the following items:
•
The cooling system is working, and you can hear fan rotating noise and feel air being blown
out.
•
The LEDs on the SEUs show that the system is operating correctly. For more information
about LEDs, see H3C S12500CR Switch Router Series Hardware Reference.
appears, you can configure the device.
<Sysname>
31