Section 12 Serial Communication Interface (Sci); Features - Renesas H8SX/1520 Series Hardware Manual

32-bit cisc microcomputer
Hide thumbs Also See for H8SX/1520 Series:
Table of Contents

Advertisement

Section 12 Serial Communication Interface (SCI)

This LSI has two independent serial communication interface (SCI) channels. The SCI can handle
both asynchronous and clocked synchronous serial communication. Asynchronous serial data
communication can be carried out with standard asynchronous communication chips such as a
Universal Asynchronous Receiver/Transmitter (UART) or Asynchronous Communication
Interface Adapter (ACIA). A function is also provided for serial communication between
processors (multiprocessor communication function). The SCI also supports the smart card (IC
card) interface conforming to ISO/IEC 7816-3 (Identification Card) as an extended asynchronous
communication mode. Figure 12.1 shows a block diagram of the SCI.
12.1

Features

• Choice of asynchronous or clocked synchronous serial communication mode
• Full-duplex communication capability
The transmitter and receiver are mutually independent, enabling transmission and reception to
be executed simultaneously. Double-buffering is used in both the transmitter and the receiver,
enabling continuous transmission and continuous reception of serial data.
• On-chip baud rate generator allows any bit rate to be selected
The external clock can be selected as a transfer clock source (except for the smart card
interface).
• Choice of LSB-first or MSB-first transfer (except in the case of asynchronous mode 7-bit data)
• Four interrupt sources
The interrupt sources are transmit-end, transmit-data-empty, receive-data-full, and receive
error. The transmit-data-empty and receive-data-full interrupt sources can activate the DMAC.
• Module stop mode can be set
Asynchronous Mode:
• Data length: 7 or 8 bits
• Stop bit length: 1 or 2 bits
• Parity: Even, odd, or none
• Receive error detection: Parity, overrun, and framing errors
• Break detection: Break can be detected by reading the RxD pin level directly in case of a
framing error
Downloaded from
Elcodis.com
electronic components distributor
Section 12 Serial Communication Interface (SCI)
Rev. 3.00 Mar. 14, 2006 Page 377 of 804
REJ09B0104-0300

Advertisement

Table of Contents
loading

Table of Contents