Renesas H8SX/1520 Series Hardware Manual page 688

Section 17 Flash Memory (0.18-(m F-ZTAT Version)
(a)
User Boot MAT Programming Selection
The boot program will transfer a programming program. The data is programmed to the user boot
MATs by the transferred programming program.
Command H'42
• Command, H'42, (one byte): User boot-program programming selection
Response H'06
• Response, H'06, (one byte): Response to user boot-program programming selection
When the programming program has been transferred, the boot program will return ACK.
Error Response
• Error response : H'C2 (1 byte): Error response to user boot MAT programming selection
• ERROR : (1 byte): Error code
H'54: Selection processing error (transfer error occurs and processing is not completed)
(b) User MAT Programming Selection
The boot program will transfer a program for user MAT programming selection. The data is
programmed to the user MATs by the transferred program for programming.
Command H'43
• Command, H'43, (one byte): User-program programming selection
Response H'06
• Response, H'06, (one byte): Response to user-program programming selection
When the programming program has been transferred, the boot program will return ACK.
Error Response
• Error response : H'C3 (1 byte): Error response to user boot MAT programming selection
• ERROR : (1 byte): Error code
H'54: Selection processing error (transfer error occurs and processing is not completed)
Rev. 3.00 Mar. 14, 2006 Page 650 of 804
REJ09B0104-0300
Downloaded from Elcodis.com electronic components distributor
H'C2 ERROR
H'C3 ERROR