A/D Input Hold Function In Software Standby Mode; Figure 15.11 Analog Input Pin Equivalent Circuit - Renesas H8SX/1520 Series Hardware Manual

32-bit cisc microcomputer

Hide thumbs Also See for H8SX/1520 Series:

Table of Contents

Section 15 A/D Converter

To A/D converter

Note: Values are reference values.

A/D Input Hold Function in Software Standby Mode

When this LSI enters software standby mode with A/D conversion enabled, the A/D conversion

are retained, and the analog current is equal to as during A/D conversion. If the analog power

supply current needs to be reduced in software standby mode, clear the ADST, TRGS1, and

TRGS0 bits all to 0 to disable A/D conversion.

Rev. 3.00 Mar. 14, 2006 Page 566 of 804

REJ09B0104-0300

Downloaded from

electronic components distributor

Table of Contents