Renesas H8SX/1520 Series Hardware Manual page 629

Bit Bit Name

3
2 WD
1 WA
0 SF
Downloaded from Elcodis.com electronic components distributor
Initial
Value R/W Description
 
Unused
Returns 0.

R/W Write Data Address Detect
When an address not in the flash memory area is
specified as the start address of the storage destination
for the program data, an error occurs.
0: Setting of the start address of the storage
1: Setting of the start address of the storage

R/W Write Address Error Detect
When the following items are specified as the start
address of the programming destination, an error
occurs.
•
•
0: Setting of the start address of the programming
1: Setting of the start address of the programming

R/W Success/Fail
Returns the programming result.
0: Programming has ended normally (no error)
1: Programming has ended abnormally (error occurs)
Section 17 Flash Memory (0.18-(m F-ZTAT Version)
destination for the program data is normal
destination for the program data is abnormal
An area other than flash memory
The specified address is not aligned with the 128-
byte boundary (lower eight bits of the address are
other than H'00 and H'80)
destination is normal
destination is abnormal
Rev. 3.00 Mar. 14, 2006 Page 591 of 804
REJ09B0104-0300