Setting For Login By Password Authentication - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > MEAP > Setting the method to login to SMS > Setting for login by Password Authentication

■ Setting for login by Password Authentication

The procedures for changing the password authentication Start/ stop settings are as follows.
1) Access SMS by RLS Authentication from the PC browser on the same network as the
MEAP device.
URL: https://<IP address of MEAP device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls
Login screen (In case authentication method is SSO-H)
2) Select [System Application Management]
2 Technology > MEAP > Setting the method to login to SMS > Setting for login by Password Authentication
3) Click [Start] or [Stop] button shown in Status field of SMS Installer Service (Password
Authentication) to check if the status is changed.
4) Logout once and login again to check to see that the setting is applied properly.
When clicking [Stop] to change the status to [Start], another password authentication login
screen is firstly shown. When trying to access the password authentication screen after
clicking [Start] to change the status to [Stop], the user is automatically redirected to RLS
F-2-225
authentication screen.
Password authentication started screen and Password authentication stopped screen
F-2-226
2-175
F-2-227
F-2-228
2-175