Login By Rls Authentication - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > MEAP > Login to SMS > Login by RLS Authentication
2) If the wrong password is entered, the following window is displayed. The user's system
administrator may have changed the password, so confirm the password with the system
administrator. Note that there is no special password for service.
2 Technology > MEAP > Login to SMS > Login by RLS Authentication

■ Login by RLS Authentication

Login without using the SMS login window but by entering the user ID and password for
authentication in the RLS (Remote Login Service) window. The user information (user
name and password) used is the information for domain authentication or local device
authentication. The login procedures are as follows.
1) Access SMS by RLS Authentication from the PC browser on the same network as the
MEAP device.
URL: https://<IP address of MEAP device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls/
Note:
• To encrypt the password information input when logging in, SSL of the login screen was
made effective. However, it is redirected to new URL (effective SSL) even when accessing
with URL (non-SSL) before.
F-2-220
Note:
• When the device authentication method used is domain authentication, enter the user
name, password and login destination registered with Active Directory and then click 'Log
In'.
• If the authentication method used is local device authentication, enter the user name,
password and login destination registered in the device and click 'Log In'. - When using
SDL as the login service, enter the user information registered in the device, as per local
device authentication.
• The user information is set as below for local device authentication by default. Both are
case sensitive.
- User Name: Administrator
- Password: password
2-172
F-2-221
2-172