Debug Frrp - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
Usage Executing this command without the optional ring-id command clears the
Information
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command executes. This command clears
the following counters:
•
•
•
Example
Dell#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related show frrp
Commands

debug frrp

Clear the FRRP statistics counters.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
Force10 Resilient Ring Protocol (FRRP)
Description
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
— displays the Resilient Ring Protocol configuration.
781