Source And Destination Port Range - Avaya G250 Administration

Configuring policy
The following command allows any destination IP address for rule 3 in QoS list 404:
G350-001(QoS 404/rule 3)# destination-ip any
The following command specifies a source IP address in the range 10.10.0.0 through
10.10.255.255 for rule 1 in access control list 301:
G350-001(ACL 301/ip rule 1)# source-ip 10.10.0.0 0.0.255.255
The following command specifies a source IP address outside the range 64.236.24.0 through
64.236.24.255 for rule 7 in access control list 308:
G350-001(ACL 308/ip rule 7)# no source-ip 64.236.24.0 0.0.0.255
The following command specifies a source IP address in the range 64.<any>.24.<any> for rule
6 in access control list 350:
G350-001(ACL 350/ip rule 6)# source-ip 64.*.24.*

Source and destination port range

To specify a range of source and destination ports to which the rule applies, use the following
commands, followed by either port name or port number range criteria:
tcp source-port — the rule applies to TCP packets from ports that match the defined
●
criteria
tcp destination-port — the rule applies to TCP packets to ports that match the
●
defined criteria
udp source-port — the rule applies to UDP packets from ports that match the defined
●
criteria
udp destination-port — the rule applies to UDP packets to ports that match the
●
defined criteria
This command also sets the IP protocol parameter to TCP or UDP.
The port name or number range criteria can be any of the following:
a range — type range, followed by two port numbers, to set a range of port numbers to
●
which the rule applies
equal — type eq, followed by a port name or number, to set a port name or port number to
●
which the rule applies
greater than — type gt, followed by a port name or port number, to apply the rule to all
●
ports with a name or number greater than the specified name or number
less than — type lt, followed by a port name or port number, to apply the rule to all ports
●
with a name or number less than the specified name or number
any — type any to apply the rule to all port names and port numbers
●
454 Administration for the Avaya G250 and Avaya G350 Media Gateways