Clutch Circuit: Removal - Refitting - Renault Laguna III Manual

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
PK4
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the air filter box (see Air filter unit: Removal - Re-
fitting) (MR 415, 12A, Fuel mixture),
- the bolt (1) from the max fuse box.
a Move the max fuse box.
LEFT-HAND DRIVE
a Remove:
- the engine undertray bolts,
- the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the bleed plug (2) .
a Connect a transparent pipe to the bleed hole running
to an empty container placed under the bleed hole.
a Slightly loosen the bleed screw (3) .
a Depress the clutch pedal with your hand (to drain the
123036 reservoir, the master cylinder and the clutch pipe).
a Remove the clip (4) from the connecting pipe be-
tween the master cylinder and the slave cylinder.
a Disconnect the clutch control pipe from the slave cyl-
inder.
a Insert the plugs into each opening.
37A-62
37A
113919