Renault Laguna III Manual page 2402

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
D91, and PK4, and LEFT-HAND DRIVE
a Press the retaining clip of the clutch control pipe on
the slave cylinder.
a Connect the clutch control pipe to the master cylin-
der.
a Refit the retaining clip of the clutch control pipe on
the master cylinder.
III - FINAL OPERATION
a Clip:
- the clutch circuit pipe on the electric coolant pump
support,
- the bonnet unlocking cable on the electric coolant
pump support.
a Connect the electric coolant pump connector.
a Refit:
- the « support - electric coolant pump » assembly,
- the max fuse box,
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery: Removal - Refitting)
(80A, Battery).
a Bleed the clutch circuit (see 37A, Mechanical com-
ponent controls, Clutch circuit: Bleed, page 37A-
47) .
a Refit the engine undertray.
37A-68
37A