Renault Laguna III Manual page 2392

MECHANICAL COMPONENT CONTROLS
Clutch master cylinder: Removal - Refitting
D91, and PK4, and LEFT-HAND DRIVE
Special tooling required
Emb. 1797 Socket (24 mm) for removal -
refitting of the clutch master
cylinder
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the battery (see Battery: Removal - Refitting)
(80A, Battery),
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the engine undertray bolts,
- the engine undertray,
- the dashboard lower trim on the driver's side (see
Dashboard lower trim: Removal - Refitting)
(57A, Interior equipment).
a Remove the bolt (1) from the max fuse box.
a Move the max fuse box to one side.
37A-58
37A
123036