Renault Laguna III Manual page 2400

MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
D91, and PK4, and LEFT-HAND DRIVE
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the battery (see Battery: Removal - Refitting)
(80A, Battery),
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the engine undertray bolts,
- the engine undertray.
a Remove the bolt (1) from the max fuse box.
a Move the max fuse box to one side
a Remove the electric coolant pump mounting bolt (2)
.
a Disconnect the connector (3) from the electric cool-
ant pump.
a Unclip:
- the bonnet unlocking cable from the electric cool-
ant pump support,
- the clutch circuit pipe from the electric coolant
pump support.
a Separate the « support - electric coolant pump » as-
sembly.
123036
37A-66
37A
123952