Renault Laguna III Manual page 2405

MECHANICAL COMPONENT CONTROLS
Manual gearbox control cable: Removal - Refitting
PK4 or TL4, and LEFT -HAND DRIVE
a Remove:
- the bulkhead seal bolts (17) ,
- the control cables.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Fit:
- the control cables,
- the bulkhead seal bolts.
a Tighten the bulkhead seal bolts.
a Clip:
- the gearbox control cable sleeve stops on the gear-
box,
- the anchoring ball joints of the gear control cables
on the gearbox using pliers.
122741
a Clip:
- the control cable sleeve stops (18) on the control
unit,
- the anchoring ball joint (19) on the control unit us-
ing pliers,
- the anchoring ball joint by pressing the button (20)
on the control unit.
a Fit the control unit.
a Refit:
- the gear control unit nut (4) ,
37A-71
37A
128179
122735