OSPF C
OMMANDS
SHOW IP OSPF NEIGHBOR
show ip ospf neighbor
Overview
Use this command to display information on OSPF neighbors. Include the ospf-id
parameter with this command to display information about specified instances.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip ospf [<ospf-id>] neighbor <neighbor-ip-addr> [detail]
show ip ospf [<ospf-id>] neighbor detail [all]
show ip ospf [<ospf-id>] neighbor [all]
show ip ospf [<ospf-id>] neighbor interface <ip-addr>
Mode
User Exec and Privileged Exec
Examples
awplus#
awplus#
awplus#
Output
Note that before a device enters OSPF Graceful Restart it first informs its OSPF
neighbors. In the show output, an * symbol beside the Dead Time parameter
indicates that the device has been notified of a neighbor entering the graceful
restart state.
C613-50631-01 Rev A
Parameter
<ospf-id>
<neighbor-ip-addr>
all
detail
<ip-addr>
show ip ospf neighbor detail
show ip ospf neighbor 1.2.3.4
show ip ospf neighbor interface 10.10.10.50 detail all
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
<0-65535> The ID of the router process for which
information will be displayed.
The Neighbor ID, entered as an IP address.
Include downstatus neighbor.
Detail of all neighbors.
IP address of the interface.
"Getting Started
Guide.
1195