Show Ip Interface - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Centrecom fs980m series fast ethernet managed access switches alliedware plus version 5.4.7-0.x

Hide thumbs Also See for CentreCOM FS980M/9:

Table of Contents

DDRESSING AND

SHOW IP INTERFACE

show ip interface

Use this command to display information about interfaces and the IP addresses

assigned to them. To display information about a specific interface, specify the

interface name with the command.

For information on filtering and saving command output, see the

with AlliedWare Plus" Feature Overview and Configuration

show ip interface [<interface-list>] [brief]

User Exec and Privileged Exec

To show brief information for the assigned IP address for interface port1.0.2 use

the command:

To show the IP addresses assigned to vlan2 and vlan3, use the command:

Figure 17-6: Example output from the show ip interface brief command

613-50157-01 Rev C

<interface-list> The interfaces to display information about. An interface-list

show ip interface port1.0.2 brief

show ip interface vlan2-3 brief

Command Reference for FS980M Series

AlliedWare Plus™ Operating System - Version 5.4.7-0.x

• an interface, e.g. vlan2

• a continuous range of interfaces separated by a hyphen, e.g.

vlan2-8 or vlan2-vlan5

• a comma-separated list of interfaces or interface ranges, e.g.

vlan2,vlan5,vlan8-10

The specified interfaces must exist.

"Getting Started

Show Quick Links

Table of Contents