3Com S7906E Command Reference Manual page 167

Field
Management address type
Management address
Management address interface
type
Management address interface ID
Management address OID
Port VLAN ID(PVID)
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN ID
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
MED information
Management address type
Management address
Type of the interface identified by the management address
ID of the interface identified by the management address
Management address object ID
Port VLAN ID
Port protocol VLAN ID
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of the VLAN identified by the VLAN ID
Indicates whether auto-negotiation is supported on the port.
State of auto-negotiation
Current speed and duplex state of the port
PoE device type, which can be :
PSE, indicating a power supply device
PD, indicating a powered device
Indicates whether or not the device can operate as a PSE.
Indicates whether or not the device is operating as a PSE.
Indicates whether or not the PSE-PD pair control is available.
PoE mode, which can be Signal or Spare.
Port power classification of the PD, which can be:
Class0
Class1
Class2
Class3
Class4
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not
enabled.
Maximum frame size supported
MED LLDP information
1-4
Description