3Com S7906E Command Reference Manual page 145

display dldp statistics
Syntax
display dldp statistics [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Port type and port number.
Description
Use the display dldp statistics command to display the statistics on the DLDP packets passing
through a port.
If you do not provide the interface-type or interface-number argument, this command displays the
statistics on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics
Interface GigabitEthernet2/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Interface GigabitEthernet2/0/2
Packets sent : 7
Packets received : 7
Invalid packets received : 3
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 4
# Display the statistics on the DLDP packets passing through GigabitEthernet 2/0/1.
<Sysname> display dldp statistics GigabitEthernet 2/0/1
Interface GigabitEthernet2/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
1-3