3Com S7906E Command Reference Manual page 171

Field
System capabilities enabled
Management address type
Management address
Management address interface type
Management address interface ID
Management address OID
Port VLAN ID
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
Description
Capabilities currently enabled on the neighboring
device, which can be:
Bridge, indicating switching is currently enabled.
Router, indicating routing is currently enabled.
Management address type
Management address
Type of the interface identified by the management
address
Management address interface ID
Management address object ID
Port VLAN ID
Port protocol VLAN ID
Indicates whether protocol VLAN is supported.
Indicates whether protocol VLAN is enabled.
Name of he port VLAN
Indicates whether auto-negotiation is supported.
State of auto-negotiation
Current speed and duplex state
PoE device type, which can be:
PSE, indicating a power supply device.
PD, indicating a powered device.
Indicates whether or not the device can operate as a
PSE.
Indicates whether or not the device is operating as a
PSE.
Indicates whether or not the PSE-PD pair control is
available.
PoE mode, which can be Signal or Spare.
Port power classification of the PD, which can be the
following:
Class0
Class1
Class2
Class3
Class4
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is
not enabled.
Maximum frame size supported
1-8