Service Loopback Group Configuration Commands; Display Service-Loopback Group - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

1
Service Loopback Group Configuration
Commands

Service Loopback Group Configuration Commands

display service-loopback group

Syntax
display service-loopback group [ number ]
View
Any view
Default Level
1: Monitor level
Parameters
number: ID of the service loopback group to be displayed. The range of the number argument is 1 to
1,024.
Description
Use the display service-loopback group command to display information of the specified service
loopback group. If no service loopback group is specified, information of all service loopback groups is
displayed.
Examples
# Display information of service loopback group 5.
<Sysname> display service-loopback group 5
Service Group ID:
Service Type: tunnel
Member
-------------------------------------------------------------------------
Eth2/0/1
Eth2/0/2
Table 1-1 display service-loopback group command output description
Service Group ID
Quote Number
Service Type
5
Quote Number: 0
Field
Status
Selected
Selected
Service loopback group ID
Reference count of the service loopback group
Service type of the service loopback group
1-1
Description

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents