Reset Lacp Statistics; Shutdown - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Ethernet 2/0/1 to aggregation group 22.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] port link-aggregation group 22

reset lacp statistics

Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type interface-number ] ]
View
User view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Interface type and interface number.
to: Specifies an interface range in the form of interface-type interface-number to interface-type
interface-number, where the start interface number must be smaller than the end interface number.
Note that both the start interface and the end interface are inclusive.
Description
Use the reset lacp statistics command to clear the LACP statistics for the specified interface(s) or all
interfaces if no interface is specified.
Related commands: display link-aggregation member-port.
Examples
# Clear the LACP statistics for all Ethernet ports.
<Sysname> reset lacp statistics

shutdown

Syntax
shutdown
undo shutdown
View
Layer-2 aggregate interface view
Default Level
2: System level
1-12

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S7906E and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents