Lacp System-Priority; Link-Aggregation Mode - 3Com S7906E Command Reference Manual

Parameters
port-priority: LACP port priority, in the range of 0 to 65535.
Description
Use the lacp port-priority command to set the LACP priority of a port.
Use the undo lacp port-priority command to restore the default.
The default LACP priority of a port is 32768.
Examples
# Set the LACP priority of Ethernet 1/0 to 64.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] lacp port-priority 64

lacp system-priority

Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default Level
2: System level
Parameters
system-priority: LACP priority of the local system, in the range of 0 to 65535.
Description
Use the lacp system-priority command to set the LACP priority of the local system.
Use the undo lacp port-priority command to restore the default.
By default, the system LACP priority is 32768.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64

link-aggregation mode

Syntax
link-aggregation mode dynamic
undo link-aggregation mode
1-10