3Com S7906E Command Reference Manual page 169

Parameters
interface interface-type interface-number: Specifies a port by its type and number.
brief: Displays the LLDP information in brief.
Description
Use the display lldp neighbor-information command to display the LLDP information about the
neighboring devices received through a port.
With no keyword/argument specified, this command displays the LLDP information received through all
the ports.
Examples
# Display the LLDP information received through all the ports.
<Sysname> display lldp neighbor-information
LLDP neighbor-information of port 144[GigabitEthernet2/0/48]:
Neighbor index
Update time
Chassis type
Chassis ID
Port ID type
Port ID
Port description : GigabitEthernet3/0/48 Interface
System name
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled
Management address type
Management address
Management address interface type : IfIndex
Management address interface ID
Management address OID
Port VLAN ID(PVID): 1
Port and protocol VLAN ID(PPVID) : 1
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled
VLAN name of VLAN 1: VLAN 0001
Auto-negotiation supported : Yes
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
: 1
: 0 days,1 hours,45 minutes,4 seconds
: MAC address
: 000f-e22e-972b
: Interface name
: GigabitEthernet3/0/48
: System
: Bridge,Router
: ipV4
: 192.168.0.74
: 347
: 0
: No
: Yes
: speed(1000)/duplex(Full)
: PSE
: Yes
: No
1-6