Display Vlan - 3Com S7906E Command Reference Manual

Field
Line protocol current state
Description
The Maximum Transmit Unit
Internet protocol processing :
IP Packet Frame Type
Hardware address
IPv6 Packet Frame Type

display vlan

Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-id1: Displays the information of a VLAN specified by VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays the information of a range of VLANs specified by a VLAN ID range.
all: Displays all current VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID of each dynamic VLAN. Dynamic VLANs
refer to VLANs that are generated through GVRP or those distributed by a RADIUS server.
reserved: Displays information of the reserved VLANs. Protocol modules determine reserved VLANs
according to function implementation, and reserved VLANs serve protocol modules. You cannot do any
operation on reserved VLANs.
static: Displays the number of static VLANs and the ID of each static VLAN. Static VLANs refer to
VLANs manually created.
Description
Use the display vlan command to display VLAN information.
Related commands: vlan.
Examples
# Display VLAN 2 information.
The link layer protocol state of a VLAN interface, which can be
one of the following:
DOWN: The protocol state of this VLAN interface is down,
usually because no IP address is configured.
UP: The protocol state of this VLAN interface is up.
The description string of a VLAN interface
The MTU of a VLAN interface
IP packets processing ability. Disabled indicates that the interface
is not configured with an IP address.
IPv4 outgoing frame format
MAC address corresponding to a VLAN interface
IPv6 outgoing frame format
1-3
Description