Interface Bridge-Aggregation; Lacp Port-Priority - 3Com S7906E Command Reference Manual

[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] enable snmp trap updown

interface bridge-aggregation

Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
View
System view
Default Level
2: System level
Parameters
interface-number: Layer-2 aggregate interface number. The value range is 1 to 1,024..
Description
Use the interface bridge-aggregation command to create a Layer-2 aggregate interface and enter the
Layer-2 aggregate interface view.
Use the undo interface bridge-aggregation command to remove a Layer-2 aggregate interface.
Upon creation of a Layer-2 aggregate interface, a Layer-2 aggregation group numbered the same is
created automatically. Removing the Layer-2 aggregate interface also removes the Layer-2
aggregation group. At the same time, the member ports of the aggregation group, if any, leave the
aggregation group.
Examples
# Create Layer-2 aggregate interface Bridge-aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]

lacp port-priority

Syntax
lacp port-priority port-priority
undo lacp port-priority
View
Ethernet interface view
Default Level
2: System level
1-9