Lldp Configuration Commands; Display Lldp Local-Information - 3Com S7906E Command Reference Manual

1

LLDP Configuration Commands

LLDP Configuration Commands

display lldp local-information

Syntax
display lldp local-information [ global | interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
global: Displays the global LLDP information.
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp local-information command to display the global LLDP information or the
information contained in the LLDP TLVs to be sent to neighboring devices through a port.
If no keyword or argument is specified, this command displays all the LLDP information to be sent,
including the global LLDP information and the LLDP information about the LLDP-enabled ports.
Examples
# Display all the LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled
MED information
Device class: Connectivity device
(MED inventory information of master board)
HardwareRev
FirmwareRev
SoftwareRev
: 000f-e218-d0d1
: System
: Bridge,Router
: VER.A
: 202
: S7900E
1-1