Port Service-Loopback Group - 3Com S7906E Command Reference Manual

Member
Status

port service-loopback group

Syntax
port service-loopback group number
undo port service-loopback group
View
Ethernet interface view
Default Level
2: System level
Parameters
number: Service loopback group ID. The value range for the number argument is 1 to 1,024..
Description
Use the port service-loopback group command to assign the Layer-2 Ethernet interface to the
specified service loopback group.
Use the undo port service-loopback group command to remove the Layer-2 Ethernet interface from
the specified service loopback group.
Note that you cannot remove the last member port of a referenced service loopback group.
Examples
# Assign Layer-2 Ethernet interface Ethernet 2/0/1 to service loopback group 1.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] port service-loopback group 1
service-loopback group
Syntax
service-loopback group number type { multicast-tunnel | tunnel } *
undo service-loopback group number
View
System view
Default Level
2: System level
Field
Member ports of the service loopback group
Port state, which can be selected or unselected
1-2
Description