Lldp Fast-Count; Lldp Hold-Multiplier - 3Com S7906E Command Reference Manual

Examples
# Configure the encapsulation format for LLDPDUs as SNAP on GigabitEthernet 2/0/3.
<Sysname> system-view
[Sysname] interface gigabitethernet2/0/3
[Sysname-GigabitEthernet2/0/3] lldp encapsulation snap

lldp fast-count

Syntax
lldp fast-count value
undo lldp fast-count
View
System view
Default level
2: System level
Parameters
value: Number of the LLDPDUs to be sent successively when a new neighboring device is detected.
This argument ranges from 1 to 10.
Description
Use the lldp fast-count command to set the number of the LLDPDUs to be sent successively when a
new neighboring device is detected.
Use the undo lldp fast-count command to restore the default.
By default, the number is 3.
Examples
# Configure to send four LLDP successively when a new neighboring device is detected.
<Sysname> system-view
[Sysname] lldp fast-count 4

lldp hold-multiplier

Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
View
System view
Default level
2: System level
1-20