3Com S7906E Command Reference Manual page 176

Transmit delay
Trap interval
Fast start times
Port 97 [GigabitEthernet2/0/1]:
Port status of LLDP
Admin status
Trap flag
Roll time
Number of neighbors:
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
Table 1-4 display lldp status command output description
Global status of LLDP
The current number of LLDP neighbors
The current number of CDP neighbors
LLDP neighbor information last changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port number interface-type interface-number
Port status of LLDP
Admin status
Trap Flag
Roll time
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: 0s
1
: 0
: 0
: 22
Field
1-13
Description
Indicating whether or not LLDP is globally
enabled
Total number of the LLDP neighbor devices
The current number of CDP neighbors
The last changed time of LLDP neighbor
information
Interval to send LLDPDU
TTL multiplier
Initialization delay
Delay period to send LLDPDUs
Interval to send traps
Number of the LLDPDUs to be sent
successively when a new neighboring device
is detected
Port LLDP status
Indicates whether or not LLDP is enabled on
the port.
LLDP mode of the port, which can be:
TxRx. A port in this mode sends and
receives LLDPDUs.
Rx_Only. A port in this mode receives
LLDPDUs only.
Tx_Only. A port in this mode sends
LLDPDUs only.
Disable. A port in this mode does not send
or receive LLDPDUs.
Indicates whether or not trap is enabled.
LLDP polling interval. A value of 0 indicates
LLDP polling is disabled.