Display Lldp Tlv-Config - 3Com S7906E Command Reference Manual

Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Syntax
display lldp tlv-config [ interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp tlv-config command to display the TLVs that are currently sent through a port.
If no port is specified, this command displays all the TLVs that are currently sent through all the ports.
Examples
# Display all the TLVs that are currently sent through all the ports.
<Sysname> display lldp tlv-config
LLDP tlv-config of port 97[GigabitEthernet2/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
IEEE 802.1 extend TLV:
Port VLAN ID TLV
Port And Protocol VLAN ID TLV
Field
STATUS
YES
YES
YES
YES
YES
YES
YES
1-14
Description
Number of the LLDP neighbors connecting to
the port
Number of the MED neighbors connecting to
the port
Number of the CDP neighbors connecting to
the port
Number of the optional TLVs contained in an
LLDPDU sent through the port
Number of the unknown TLVs contained in a
received LLDPDU
DEFAULT
YES
YES
YES
YES
YES
YES
YES