Vlan Configuration Commands; Description - 3Com S7906E Command Reference Manual

Hide thumbs Also See for S7906E:

Table of Contents

VLAN Configuration Commands

description text

undo description

VLAN view, VLAN interface view

Default Level

2: System level

text: Description of a VLAN or VLAN interface. Currently, the device supports the following types of

characters or symbols: standard English characters (numbers and case-sensitive letters), special

English characters, spaces, and other characters or symbols that conform to the Unicode standard.

For a VLAN, the description string contains 1 to 32 characters.

For a VLAN interface, the description string contains 1 to 80 characters.

Use the description command to configure the description of the current VLAN or VLAN interface.

Use the undo description command to restore the default.

For a VLAN, the default description is the VLAN ID, for example, VLAN 0001; for a VLAN interface, the

default description is the name of the interface, for example, Vlan-interface 1 Interface.

You can configure a description to describe the function or connection of a VLAN or VLAN interface for

management sake.

# Configure the description of VLAN 1 as RESEARCH.

<Sysname> system-view

[Sysname] vlan 1

[Sysname-vlan1] description RESEARCH

# Configure the description of VLAN-interface 2 as VLAN-INTERFACE-2.

<Sysname> system-view

[Sysname] vlan 2

[Sysname-vlan2] quit

[Sysname] interface vlan-interface 2

Table of Contents

S7910e S7906e-v S7903e S7903e-s S7902e