New Holland T8010 Manual page 1163

Hide thumbs Also See for T8010:

Table of Contents

Install the evaporator temperature sensor in the

evaporator /heater as sembly. The evaporator

temperature sensor MUST be installed 4.2 inches

(107 mm) from the left hand rear side of the

evaporator. The sensor must be installed below the

second refrigeration tube row at a 30° downward

Insert the sensor in the evaporator up to the angled

section, being careful not to kink the sensor.

Install the 6-pin connector on the blower speed

driver. Install the two screws to secure the driver and

its mounting plate at the rear of the box.

Section 50 - Climate Control - Chapter 2

Chapters

Table of Contents

T8020 T8030 T8040