STEP 192
Connect the short hose (1) from the heater valve to
the evaporator/heater core. Pinch the clamp to open
it and secure the hose at the evaporator line.
Connect the heater return line (2) to the evaporator
heater core and secure with the clamp.
STEP 193
Remove the caps or plugs from the liquid and suction
lines to the thermal expansion valve.
Install new O-rings on the lines before reconnecting.
Lubricate the O-rings with clean mineral oil prior to
installation.
STEP 194
Using the two hand, two wrench method, reconnect
the air conditioning suction and liquid lines to the
valve.
Section 50 - Climate Control - Chapter 2
50-2-103
2
1
RD02G124
RD02G106
RD02G104