Forward Telephone „On Busy" To An Internal/External Telephone Because You Are Currently Telephoning; Forward Telephone „On No Reply" To An Internal/External Telephone In Case Of A Short Absence; Switch The Already Configured Subscriber Call Forwarding On/Off; Switch Off All Active Subscriber Forwarding Settings For The Telephone - Auerswald COMpact 2206 USB Operator's Manual

26
Somebody should be reachable for internal/external Callers to your Telephone Number (Subscriber Call Forwarding)
case of external telephone numbers. On the PBX you can also enter
internal or Short-Code Dial Numbers as destination telephone numbers.
T
Here you can also use the T-Net digit order that means you
are able to switch on the „Call Forwarding unconditional" with
*21*
+ telephone number +
67 21
instead of ; „no Reply"
If you use an analog telephone as an internal subscriber telephone
where the „Call Forwarding" is to be switched on/off via T-Net function
Forward Telephone „on Busy" to an internal/external Telephone because you are currently Telephoning
The „Forward telephone on Busy" is configured similarly as described
for the „CF unconditional" above. The digits
Forward Telephone „on no Reply" to an internal/external Telephone in Case of a short Absence
The „Forward telephone on no Reply" is configured similarly as
described for the „CF unconditional" previously. The digits

Switch the already configured Subscriber Call Forwarding on/off

b 7 Q 12_
public „CF unconditional"
your
pass- (for „CF on busy" 13 instead of 12 and
telephone
word for „CF on no Reply" 14 instead of 12)

Switch off all active Subscriber Forwarding Settings for the Telephone

b 7 Q
corresponding tel-
public password
ephone
N
These settings are configuration dependent.

Receive Calls at another internal Telephone (Follow-me)

b 7 Q
target
public password
telephone
b 7 Q
target
public password
telephone
N
These settings are configuration dependent.
Attention! If you configure Follow-me for a telephone, a previ-
ously configured subscriber Call Forwarding for this telephone
will be switched off. If you switch off Follow-me on a phone, all the sub-
scriber Call Forwarding „unconditional" settings that have this telephone
as the destination, will be switched off.
The destination telephone needs to have at least the partial exchange
line authorization for forwarded external calls.
You also can switch off the Follow-me from the forwarded telephone
7 120#
with + password + or with
# #21#
and switch off with („on busy"
61 21
instead of ).
12
only have to be
20 #
25 n
internal number of the
telephone to be forwarded
25 0
# 21 #
.
key/menu, you will also be able to use this comfortable operation (see
manual of the telephone). Then you will hear the acknowledgement
tone instead of the public exchange announcement.
f you are asked to enter the destination number when using the T-Net
function, you will have to enter the Exchange Line Access Number
case of external numbers. You can also enter destination numbers as
internal or Short-Code Dial Numbers.
N
These settings are configuration dependent.
exchanged for
„CF unconditional".
have to be exchanged for
12
only Reply" instead of an „CF unconditional".
1 #
Switch on Call Forwarding without entry of a telephone
0
or
Switch off all subscriber Call Forwarding settings for the telephone
#
#
Thanks to Follow-me you can also forward the calls of several subscrib-
ers to a single telephone next to you.
13
in order to switch on/off a „CF on busy" instead of an
14
in order to switch on/off an „CF on no
number because number has already been saved
Switch off subscriber Call Forwarding
Switch on Follow-me on the destination telephone
Switch off Follow-me on the destination telephone
0
in