Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1382

I-Fax
File
*1
Always Add Device Signature to Send
Restrict File Formats
E-mail/Ifax Settings
Register Unit Name
Communication Settings
SMTP RX
POP
SMTP Server
E-mail Address
POP Server
POP Address
POP Password
POP Interval
POP AUTH Method
POP Authentication before Sending
SMTP Authentication (SMTP AUTH)
User
Password
Allow SSL (POP)
Allow SSL (SMTP Send)
Display Auth. Screen When Send
Allow SSL (SMTP Receive)
Maximum Data Size for Sending
Default Subject
Use SMTP Authentication for Each User
Specify Authentication User Dest. to Reply
Set Authorized User Destination to Sender
Allow Sending to Unregistered Destinations
Full Mode TX Timeout
Print MDN/DSN upon Receipt
Use Send via Server
Allow MDN Not via Server
Restrict TX Destination Domain
Restrict Sending to Domains
Permitted Domains
Fax Settings *1
Default Screen
Change Default Settings
Register Options Shortcuts
Shortcut 1
Shortcut 2
Item Setting Description
On, Off*
On, Off*
On*, Off
On, Off*
24 characters maximum
On, Off*
On* Off
Server name or IP Address (48 characters maximum)
64 characters maximum
Server name or IP Address (48 characters maximum)
64 characters maximum
32 characters maximum
0* to 99 (If the interval is set to '0', the incoming e-mail is not
checked automatically.)
Standard*/APOP/POP AUTH
On, Off*
On, Off*
User name for SMTP authentication (64 characters maximum)
Password for SMTP authentication (32 characters maximum)
On, Off*
On, Off*
On, Off*
Always SSL,On, Off*
0=(Off)/1 to 99 MB (3MB*)
40 characters maximum (Attached Image*)
On*, Off
On, Off*
On*, Off
On, Off*
1 to 99 hours (24hours*)
On, Off*
On, Off*
On*, Off
On, Off*
Register, Details/Edit, Delete
Standard*, Address Book
Register, Initialize
Density*, Unassigned
Original Type*, Unassigned
Appendix > List of User Mode > Function Settings > Send
Device Information
Delivery Available
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Appendix > List of User Mode > Function Settings > Send
LIII
LIII