10) Open the Controller Box, and free the Signal Cable and the Power Supply Cable of the
host machine from the 4 Wire Saddles and the Edge Saddle at the back of the HDD Case
Unit.
x5
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the HDD and HDD Case
11) Remove the HDD Case Unit.
• 2 Screws (The removed screws will be used in "Installing the Encryption Board and HDD
Case Unit" step 3).)
F-9-584
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the HDD and HDD Case
x2
F-9-585
9-294
9-294