Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1275

9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Mirroring Board or
Encryption Board.
• 2 Connectors
• 6 Wire Saddles
CAUTION:
• Secure the LED Cable in the direction of the arrow.
• Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
10) Connect the 4 Connectors of the Signal Cables and the Power Supply Cables to the
Mirroring Board or Encryption Board.
• Power Supply Cable (CH B; FK2-7837)
• Signal Cable (CH B; FK2-7837)
• Signal Cable (CH A; FK2-7832)
• Power Supply Cable (CH A; FK2-7832)
F-9-563
9 Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
Power Supply Cable (CH B)
x4
CH B
CH A
Power Supply Cable (CH A)
9-278
Signal Cable (CH B)
Signal Cable (CH A)
F-9-564
9-278