Installing The Encryption Board And Hdd Case Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

5) Install the 2 HDD Lock Pins and the 2 HDD Lock Springs to the removed rail.
6) Return the rail to its original position.
• 2 Bosses
• 2 Screws (Use the screws removed in step 3).)
Hole
Hole
x2
Boss
8) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
• 2 Screws (TP Round End; M3x6)
9) Close the Edge Saddle.
x2
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
Boss
F-9-598
Edge Saddle
F-9-599
9 Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and

■ Installing the Encryption Board and HDD Case Unit

NOTE:
The following shows combination of the HDD and the Encryption Board.
• Connect "CH A" to Slot.1 (The original HDD)
• No HDD to Slot.2
C H
C H
Power Supply Cable
B
Signal Cable
A Signal Cable
Power Supply Cable
F-9-600
9-299
9-299