Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1272

6) Install the 2 HDD Lock Pins and the 2 HDD Lock Springs to the removed rail.
7) Return the rail to its original position.
• 2 Bosses
• 2 Screws (Use the screws removed in step 4).)
Hole
Hole
x2
Boss
8) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
• 2 Screws (TP Round End; M3x6)
9) Close the Edge Saddle.
x2
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
Boss
F-9-553
Edge Saddle
F-9-554
9 Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
■ Installing the Mirroring Board or Encryption Board and HDD
Case Unit
NOTE:
The following shows combination of the HDD and the Mirroring Board or Encryption
Board.
• Connect "CH A" to Slot.1 (The new HDD)
• Connect "CH B" to Slot.2 (The new HDD)
C H
A
C H
Power Supply Cable
B
Signal Cable
Signal Cable
Power Supply Cable
F-9-555
9-275
9-275