Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1292

■ Disassembling and Assembling of the HDD Removed from the
Host Machine
1) Disassemble the removed HDD.
• 4 Screws (W Sems)
• 1 Screw (TP)
• 1 HDD Grounding Plate
NOTE:
If the removed HDD has the screw (TP) and the HDD Grounding Plate, remove them.
The removed screw (TP) and the HDD Grounding Plate will not be used.
• 1 HDD Support Plate
x4
TP
HDD Grounding Plate
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Disassembling and Assembling of
HDD
HDD Support Plate
F-9-586
9 Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Disassembling and Assembling of
CAUTION: Points to Caution at Installation
Be sure to install the HDD Connector to the side with screw holes of the HDD
Connector Plate.
Label
9-295
Screw Hole
Connector
Screw Hole
F-9-587
9-295