Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1395

Replace Replace
Data Location the HDD the
/ All Main
format PCB 1
Advanced box settings
Advanced box account HDD Clear ---
Network place setting HDD Clear ---
information
PDL settings
Image forms stored in the HDD Clear ---
Form Composition mode (management
information in
SRAM)
Web browser settings
Web Access setting information HDD Clear ---
MEAP settings
MEAP application HDD Clear ---
License files for MEAP HDD Clear ---
applications
User authentication information HDD Clear ---
registered in the Local
Device Authentication user
authentication system of
SSO-H (Single Sign-On H)
Data saved using MEAP HDD Clear ---
applications
SMS (Service Management HDD Clear ---
Service) password of MEAP
Universal data settings
Unsent documents (documents HDD Clear ---
waiting to be sent with the
Delayed Send mode)
Job logs HDD Clear ---
Key Pair and Server Certificate HDD Clear ---
in Certificate Settings in TCP/IP
Settings in Network Set-tings
in System Settings (from the
Additional Functions screen)
Auto Adjust Gradation setting SRAM --- ---
values (MCON2)
PS font HDD Clear ---
Key information to be used for SRAM Clear ---
encryption when TPM is OFF (MCON2) (*1)
Clear?
Replace Initialize Function Function
Replace Function Function
the All > CLEAR > CLEAR
the TPM > CLEAR > CLEAR
Main Data / > MN- > DC-
PCB > R-CON
PCB 2 Settings CONT CON
--- --- Clear --- --- ---
--- --- Clear --- --- ---
Clear --- Clear Clear --- ---
(*1)
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- --- ---
--- --- Clear --- ---
Clear --- Clear Clear --- ---
--- --- Clear --- --- ---
Clear --- Clear Clear --- ---
(*2) (*2)
Backup by User
Function Function
Location
> CLEAR > CLEAR
Yes/No Method to be
> ADRS- > JV-
> MMI stored
BK CACHE
--- --- Clear Yes (*1) Remote UI PC
(Authentication
management
of Advanced
Box)
--- --- Clear No --- ---
--- --- --- Yes Remote UI PC
(Backup /
Restore)
--- --- --- Yes Remote UI PC
(*) (Export /
Import)
--- --- Clear No --- ---
--- --- Clear Yes SMS PC
--- --- Clear Yes SMS PC
--- --- Clear Yes --- PC
(*)
--- --- Clear No --- ---
--- --- --- No --- ---
--- --- --- No --- ---
--- --- --- No --- ---
--- --- --- No --- ---
--- --- --- No --- ---
Clear --- --- No --- ---
(*2) (*3)
Backup by CE
Location
Yes/No Method to be
stored
Yes SST PC *1: When the authentication management of Advanced Box is ON, it is
(*2) (Meapback) necessary to export the Advanced Box in advance to import at the time of
restoration.
*2: Available only in the following case: The download mode in safe mode is
started when the HDD is faulty and backup of Meapback is available by
SST. In such a case, perform the following procedure to restore:
• Execute backup of Meapback using SST
• Replace the HDD
• Install the system
• Check if the system has been normally started
• Start in safe mode and execute restoration using SST
No --- ---
Yes SST PC Note 1: When replacing Main Controller PCB 2, backup of Streaming is
(*2, 3) (Sramimg) necessary using SST because the management information is kept
in SRAM on Main Controller PCB 2.
Note 2: Restoration is available only when backup of streaming with SST is
available before replacing MCON2. Be sure to restore Streaming at
the initial startup after replacement of Main Controller PCB 2.
Note 3: Restoration of Streaming is not available if the HDD is encrypted
(when the HDD Data Encryption/Mirroring Kit is installed).
No --- --- *: Backing up available only Favorites
Yes SST PC
(Meapback)
Yes SST PC
(Meapback)
Yes SST PC
(Meapback)
Yes SST PC *: Depending on the MEAP application.
(Meapback)
Yes SST PC
(Meapback)
No --- ---
No --- ---
No --- ---
Yes SST PC
(Sramimg)
No --- ---
Yes SST PC *1: After clearing the backup key information in the HDD, it is automatically
(Sramimg)
restored from the key in the SRAM.
*2: After clearing the key information in the SRAM, it is automatically
restored from the backup key in the HDD.
*1, 2: When replacing the HDD and Main Controller PCB 2 simultaneously,
restoring the key information is not executed automatically.
*3: There is no method to back up to the external devices.
LXVI
Remarks
LXVI