1) Connect the Signal Cable and the Power Cable of the host machine to the Encryption
Board.
x2
2) Install the Encryption Board.
• 4 Screws (TP; M3x6)
x4
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
3) Install the HDD Case Unit.
• 2 Hooks
• 2 Bosses
• 2 Screws (Use the screws removed in "Removing the HDD and HDD Case Unit" step 11).)
NOTE:
Be careful not to catch the plate of the host machine with the Wire Saddles on the rear
side of the HDD Case Unit, otherwise the installation work may become difficult.
F-9-601
F-9-602
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
x2
Hook
引掛け
9-300
Hook
Boss
ボス
F-9-603
9-300