Key Pair And Server Certificate When Using Encrypted Ssl Communication; Login By Password Authentication - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > MEAP > Login to SMS > Login by Password Authentication
■ Key Pair and Server Certificate when Using Encrypted SSL
Communication
● SSL Connection for SMS
SMS is always SSL-connected, so it is required to set a key pair and server certificate as the
Default Key. When deleting [Default Key] (pre-installed key pair and server certificate) from
the Default Key, SMS cannot be accessed.
● When SMS Cannot Be Accessed
If [Default Key] is deleted by mistake or setting [Default Key] is forgotten, URL which SMS
can be accessed (http:// <IP address of the machine> :8443/sms/) cannot be accessed.
In this case, perform the following.
1. Try to access from http:// <IP address of the machine> :8000/sms/.
2. Check whether to display "HTTP 500 internal server error".
3. When the message is displayed, set a key pair and server certificate required for encrypted
SSL communication with the following procedures.
1) Select [Settings/Registration] > [Preferences] > [Network] > [TCP/IP Settings] > [SSL
Settings].
2) Select [Key and Certificate].
3) After selecting [Default Key] (pre-installed key pair and server certificate), select [ Set
as the Default Key ].
4) Select [Yes] > [OK].
Note:
• For detailed procedures of the Default Key setting, refer to [e-Manual > Security].
• As for SMS, by setting a Default Key, encrypted SSL communication is always executed
regardless of the following setting: [Management Settings] (Settings/Registration) > [MEAP
Settings] > [SSL Settings]: ON/OFF.
2 Technology > MEAP > Login to SMS > Login by Password Authentication

■ Login by Password Authentication

In the SMS login window, enter the password for authentication. Only one password can be
registered with SMS. The login procedures are as follows.
1) Access SMS from the browser of a PC on the same network as the MEAP device. The
URL is as follows.
URL: https://<MEAP Device IP address>:8443/sms/
Ex.) https://172.16.188.240:8443/sms/
Note:
• To encrypt the password information input when logging in, SSL of the login screen was
made effective. However, it is redirected to new URL (effective SSL) even when accessing
with URL (non-SSL) before.
Note:
The default password is "MeapSmsLogin." (The password is case-sensitive.) When
you want to change the display original language, change in the box in the right of the
screen.
This setting is not affect by the setting of the language of the device.
2-171
F-2-219
2-171