Canon imageRUNNER ADVANCE 6075 Series Service Manual page 216

2
Technology > External Auxiliary System > Servicing > Troubleshooting
3) Pull out the Upright Control Panel and the Arm Shaft, and rotate the Arm Rotation
Adjustment Ring to change the phase so that the Fixation Screws do not contact with the
dents formed by tightening the screws.
4) Insert the Upright Control Panel and the Arm Shaft, and retighten the 2 screws loosened in
step 3.
2 Technology > External Auxiliary System > Servicing > Troubleshooting
F-2-207
2-162
2-162